These items are either blems, overruns, or older versions. Blems may have any combination of these issues:
- Areas with 2-4 lines of stacked stitches that do not perfectly overlap
- Lines of stitching that are too long/short on one or both sides.
- Slanted stitches
- Imperfect thread tension on one or more stitches.
- Imperfect buckle placement
- Skewed or slightly off-center SLEDS insert placement
- Slightly skewed pouch elastic
Items with more distinct flaws/markings will have a short description. All blems and items in this section have been individually inspected. All blem items are fully functional unless differences in function are mentioned.
All blem placards, chest rigs, and pouches will come with the same hardware and/or accessory parts ordinarily included.
These items do not include straps. We offer options that can be found here:
H-Harness Kit
2025 SALE
- Old version of SLEDS Pistol Pouch - Coyote - Insert shape is rectangular at top. 2 available
- SLEDS Pistol Pouch - M81 - RG Velcro used instead of M81 - 5 available
- SLEDS Pistol Pouch - MC Tropic - RG Velcro used instead of MC Tropic - 10 available
- SLEDS Pistol Pouch - MC Arid - Coyote Velcro used instead of MC Arid - 4 available
- SLEDS Pistol Pouch - MC Black - Black Velcro used instead of MC Black.
- JSTA SLEDS Insert - 6 available
- SLEDS Pistol Pouch - MC- M81 Velcro used instead of MC.
- SLEDS Pistol Pouch - MC- Insert placement is slightly off.
- SLEDS Pistol Pouch - Coyote - Insert placement is slightly off.
-
SLEDS Pistol Pouch - Black - Slightly skewed elastic.
- SLEDS Pistol Pouch - M81 - Missing flap, RG Velcro used instead of M81.
- SLEDS M4/AR Pouch - Multicam - Tension is off on front box stitch - 2 available
- Compact Smoke - M81 - Flashbang elastic was used to build this, so it's essentially a slightly taller bang pouch with a smoke flap. Would fit a TQ well.
- Mid Ride Reload Adapter - 1.75", Tan - Slightly slanted stitch.
- LV MOLLE Panel - Black - Loop sewn on instead of hook to the back - 2 available
- EUD Admin Panel - Coyote
- EUD Admin Panel - MC Arid
- LV+2 Insert - Missing the internal Tegris inserts.
- 5x Handgun Mag Pouch - RG - Older version without reindexing assistance inserts.
- DRIP-9 - Flux, Black, TQ holder sewn on - Slightly skewed elastic cells.
- SLEDS Placard - 3x 5.56, Multicam - Tension is off on some front box cells.
- SLEDS Placard - 3x 5.56, Multicam - Tension is off on some front box cells.
- SLEDS Placard - 3x 5.56, Multicam - Coyote elastic used instead of Multicam.
- 7.62x51 SLEDS Placard - 3x 7.62x51, RG - Center buckles spaced incorrectly, too close together for plate carrier use.
- SLEDS DRIP - 3x 5.56, WG/BK - Slightly skewed insert.
- DR-LV - Coyote - Top buckles spaced out slightly too far from each other - 2 available.
- LV-X - 3 col., RG - Messy Velcro box stitching, lines do not overlap perfectly.
- LV-X - 3 col., Multicam - Messy Velcro box stitching, lines do not overlap perfectly.
- LV-X - 5 col., RG - Messy Velcro box stitching, lines do not overlap perfectly.
- SMG SLEDS Placard - MPX, Multicam - Early prototype made with shorter inserts.
- DR Chest Rig - MCB - Top buckle spacing is slightly off.
- DR Chest Rig - BK - Radio and smoke wings have swapped positions
- DR Chest Rig - WG/BK - Ugly stitch on lower back of rig, smoke side.
- DRIP - RG, 3x 5.56, no SLEDS inserts, TQ holder sewn on - Old version.
- DRIP - BK, 3x 5.56, no SLEDS inserts, TQ holder sewn on - Old version.
- 7.62x51 SLEDS Placard - Vietnam Tiger Stripe - Production overrun.
- 5.56 SLEDS Placard - Vietnam Tiger Stripe - Production overrun.
- DR-LV-H - Coyote - 7.62x51 AR10/417 version of the DR-LV. Production overrun.
- H-Harness Kit - MC Arid - 2 available
- H-Harness Kit - Multicam - 15 available
- H-Harness Kit - Coyote - 15 available
- H-Harness Kit - WG/BK
- H-Harness Kit - M81 Woodland - 9 available
- H-Harness Kit - MC Tropic - 6 available
- H-Harness Kit - RG - 15 available